Edinburgh: 0131 229 8211
Leeds: 0113 418 2463
London: 0207 622 7912

Focusrite Rednet HD32R
Ethernet ProTools Bridge

MPN: REDNETHD32R
Instant finance available!
Buy from just £22.74 per month. Learn more
Set preferred amount of deposit using slider below:
Deposit
%
Red Dog Music acts as a credit intermediary and only offers credit products for Deko. Finance is provided through the Deko platform by a number of lenders.
Credit provided subject to age and status. Learn more.
Discount coupons not valid for finance purchases.

When you want to combine the power of Dante and the standard of Pro Tools with extra peace of mind, you want the Focusrite Rednet HD32R

  • 32 channel bridge for Pro Tools|HD
  • Compact 1U form factor
  • Redundant Ethernet networking and power supply redundancy
  • Ethercon connectors
  • Mini Digilink connectors
  • Compatible with Pro Tools|HD, Pro Tools|HD Native and Pro Tools|HDX
  • Add Dante to Pro Tools|HD, or Pro Tools|HD to Dante

View all Focusrite RedNet.

RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports.

Dual Ethernet ports with locking etherCON connectors are provided, with several operating modes including daisy-chaining and redundancy confirmed by front-panel indicators.

Two separate power supplies with fault detection capability are included, with separate power input sockets (with retaining clips) on the rear of the unit. Power state is indicated both remotely and on the front panel.

The HD32R features a rugged, roadworthy exterior and high internal build quality. In addition, it offers a compact 1U rack-mount form factor for a full 32 channels of I/O.HD32R acts as a 64-channel (32 in/32 out) digital break in/out box, operating in the same way as a standard interface, and supporting a wide range of Pro Tools|HDX and HD cards.

Supported Pro Tools systems include Pro Tools|HDX, Pro Tools|HD Native, Pro Tools|HD Native Thunderbolt, and Pro Tools|HD TDM.

Up to six HD32R modules can be used with a Pro Tools|HDX system and three with Pro Tools|HD, allowing the maximum channel count for either. Simply connect the HD32R to Pro Tools|HD with standard Mini DigiLink connectors.

Please note that these videos are dynamically generated by means of a Youtube search for the phrase "Focusrite Rednet HD32R" to save you time searching Youtube yourself. As such, the views expressed may not be those of Red Dog Music Limited, any product features or specifications quoted should be confirmed with Red Dog Music staff prior to ordering, and the content may not always be relevant to the product shown on this page.

  • £1259.00

    A new era in audio interfaces, The Focusrite RedNet 3 lets you interface your digital equipment with your RedNet ethernet audio system

    • 32 I/O digital interface for RedNet professional audio networking system
    • 8 ADAT I/O ports support S-MUX2 and S-MUX4 standard
    • S/PDIF I/O on RCA
    • AES/EBU I/O on DB25
    • Word clock I/O on BNC
    • Supported sample rates: 44.1 / 48 / 88.2 / 96 / 192 kHz
    • Clock sources: Local or from network master device
    • Local clock sources: Internal, Word Clock input, AES input 1, ADAT input 1, S/PDIF input
    • External word clock range: Sample rate ±7.5%
  • £1049.00

    The Focusrite RedNet 5 is the simplest way to integrate the power of ethernet audio with your Pro Tools HD system

    • 32 Channel HD Bridge – connect Pro Tools HD to the RedNet network
    • Upgrade to RedNet interfaces while remaining fully compatible with your saved sessions
    • Each RedNet 5 can route up to 32 input and 32 output channels between your RedNet network and Pro Tools HD system
    • Connecting six RedNet 5 units to a Pro Tools HDX system allows up to 192 inputs and outputs - the maximum supported by Pro Tools HDX
    • Maintain your existing Pro Tools workflow with simple, logical assignment of RedNet I/O to Pro Tools HD inputs and outputs
    • Compatible with Pro Tools HD TDM systems
  • £839.99

    For situations where you want the lowest possible latency, the Focusrite RedNet PCIe card is the way to integrate your Dante system

    • 128 I/O low latency RedNet interface for PC and Mac
    • 128 channels in and 128 channels out
    • Compatible with any Dante network
    • Up to 192 kHz sample rate
    • ASIO and Core Audio drivers
    • Compatible with thunderbolt PCIe external chassis
  • £1679.00

    A new era in audio interfaces, The Focusrite RedNet 1 gives you 8 channels of premium line-level ADDA for your ethernet audio system

    • Ethernet audio interface
    • 8 analogue line level inputs and outputs
    • Analogue I/O on AES59 DB25 connectors (Tascam pinout standard)
    • 0 dBFS reference levels: +18 or +24 dBu (switchable)
    • Frequency response: 20 Hz – 20 kHz ±0.05 dB
    • THD+N: < 0.001% unweighted; -1 dBFS input, 20 Hz – 22 kHz
    • Dynamic range: 119 dB ‘A’-weighted (-60 dBFS method)
    • Converter dynamic range: 120 dB
    • Signal-to-noise ratio: 119 dB ‘A’-weighted; 20 Hz – 20 kHz
  • £1679.00

    When you need to interface multiple digital signals with your Dante network, look no further than the Focusrite Rednet D16R

    • 16 channel AES/EBU interface
    • Compact 1U form factor
    • Redundant Ethernet networking and power supply redundancy
    • Ethercon connectors
    • Sample Rate Conversion on all channels
    • Input and Output on XLR as well as DB25
    • XLR Input for DARS or Digital Audio
    • S/PDIF 2-channel I/O
    • Word Clock I/O
    • Remote routing and control
  • £1679.99

    Integrate high channel count digital audio via MADI with your ethernet audio system with the Focusrite RedNet 6

    • 64 channels of MADI I/O to the Dante-based RedNet network
    • Supports both coax and optical MADI interfaces
    • External Word Clock I/O for either RedNet or MADI
    • Supports up to 64 channels of digital audio I/O at 44.1 and 48 kHz
    • Supports 32 channels at 96 kHz and 16 at 192 kHz
    • Asynchronous sample rate converters (ASRC) allow MADI and RedNet systems to operate simultaneously at different sample rates
    • Remote routing and control from your audio computer system via a software control panel
Available to order (more info)
Usually delivered within 7 working days
  • Free shipping to most of the UK
  • Shipping to mainland UK destinations for all items over £99 is FREE. For all other items, shipping currently starts at £4.99 unless specified otherwise.

    If you require shipment to destinations outside the UK, please contact us for a quote.

  • 14-day money-back guarantee
  • For all items ordered online or over the phone, we offer the statutory 14 day “cooling off period”. This means that if you are unhappy with the goods for whatever reason, you can return them for a full refund within this period.

    Please note, however, that certain items are exempt from this – see our Terms and Conditions for more info.

  • Extended seasonal exchange
  • Items bought 1st November 2017 to 24th December 2017 are eligible for our Extended Christmas Exchange and can be exchanged until Wednesday 31st January 2018.

  • 1 year warranty
  • This product comes with a 1 year warranty as standard.

    Please note that you will need to register your product with the manufacturer to qualify for any warranty beyond 12 months.

© 2017 Red Dog Music -
1 Grassmarket, Edinburgh EH1 2HY - 0131 229 8211
Company Reg. No. SC343597 - VAT No. GB933628805 - FRN 676575