Doepfer A115 Audio Divider
8HP Frequency Divider Module
Credit provided subject to age and status. Learn more.
Discount coupons not valid for finance purchases.
Get some serious low end frequencies in your patch by generating some sub octaves with the Doepfer A-115 audio divider!
- Frequency divider for Eurorack systems
- Produce frequencies at octaves below th input signal
- Output combines input and sub-octave signals
- Level controls allow individual signals to be set to taste
The Doepfer A-115 is a four-way frequency divider. The frequency of a signal at the input is halved (half frequency = first sub-octave), quartered (1/4 frequency = second sub-octave), and so on. In this way, the DIVIDER produces four sub-octaves (F/2 down to F/16).
At the output, the Doepfer A-115 produces a summed mix of the original and the four sub-octaves. There are attenuators to control the amount (ie. Amplitude) of the original signal and each of the sub-octaves.
Bear in mind that the sub-octaves output by the A-115 are all true square waves. At the output there are always four square waves and the original signal available.
Please note that these videos are dynamically generated by means of a Youtube search for the phrase "Doepfer A115 Audio Divider" to save you time searching Youtube yourself. As such, the views expressed may not be those of Red Dog Music Limited, any product features or specifications quoted should be confirmed with Red Dog Music staff prior to ordering, and the content may not always be relevant to the product shown on this page.
You're not going to get much out of your modular without these: take home the Mutable Instruments Little Bag of Cables today!
- Bag of patch cables for Eurorack modular systems
- 5x 20cm, black
- 5x 40cm, rani pink
- 5x 40cm, turquoise
- 5x 80cm, grey.
- Braided construction
- Little bag included!
Need to convert your stereo signals to mono and vice versa in a tiny bit of space? Noise Engineering Quantic Fictus to the rescue!
- 3 channel passive stereo to mono splitter
- Handy for all mono to stereo splitting duties
- Size: 2HP Eurorack
- Depth: 1 Inch
- Power: none
A useful module in just 4HP of space, the Doepfer A-183-1 dual attenuator does a useful job and doesn't even need any power!
- Dual passive attenuator for Eurorack systems
- 1x in, 1x out and attenuation control per channel
- Width: 4HP
- Current draw: 0 mA (passive design)
The Xaoc Warna Voltage Distributor is a handy hub for splitting, summing and inverting signals!
- 2 independent 1:4 buffered multiples
- 2 voltage inverters
- Summing 4:1 mixer section, normalled to multiples
- Unity gain circuit
- 6 hp wide
- +12/-12V powered
- Skiff friendly (25 mm)
- Current draw: 50 mA
Make sure those signals have the levels you want with the linear and logarithmic attenuation of the Dreadbox White Line Attenuator
- Attenuation module for Eurorack systems
- 2 channel passive design
- Channel 1 is linear
- Channel 2 is logarithmic
Need to keep a check on health of your modular system? Then you need to get your hands on the Noise Engineering Adigo Metric module
- Monitor your modular systems health
- Size: 8HP Eurorack
- Depth: 1 Inch
- Power: 2x8 Eurorack
- Draw +12V: 10mA
- Draw -12: 10mA
- Draw +5v: 10mA
£51.00 inc VAT
Available to order (more info)
- 14-day money-back guarantee
For all items ordered online or over the phone, we offer the statutory 14 day “cooling off period”. This means that if you are unhappy with the goods for whatever reason, you can return them for a full refund within this period.
Please note, however, that certain items are exempt from this – see our Terms and Conditions for more info.
- 1 year warranty
This product comes with a 1 year warranty as standard.
Please note that you will need to register your product with the manufacturer to qualify for any warranty beyond 12 months.