Edinburgh: 0131 229 8211
Leeds: 0113 418 2463
London: 0207 622 7912

Moog Analog Delay
500 series MPN: 500-DELAY

Instant finance available!
Buy from just £17.50 per month. Learn more
Set preferred amount of deposit using slider below:
Deposit
%
Red Dog Music acts as a credit intermediary and only offers credit products for Deko. Finance is provided through the Deko platform by a number of lenders.
Credit provided subject to age and status. Learn more.
Discount coupons not valid for finance purchases.

The Moog Analog Delay 500 series gives you easy access to a warm, deep and musical delay with the flexibilty of a plugin

  • 35-800ms Analog Delay Time
  • .5x/1.0x Time and Filter Switch
  • 30dB of Input Drive and Output Gain
  • Assignable ¼” Tap Tempo and CV input
  • MIDI Control
  • 6 Waveshape LFO
  • Free VST/AU/RTAS editor
  • Stereo Linkable

The Moog Analog Delay is the world’s first delay designed exclusively for the 500 series format. It is a MIDI syncable module that features a 100% analog signal path, front panel MIDI, and an assignable Tap Tempo/CV jack. Included with each unit is a free VST/AU/RTAS editor for easy implementation into any recording, live, or performance situation.

Out of the box you get 800ms of the warmest, and most musical delay on the planet. No emulation plugin can impart depth and life into your mixes like the Analog Delay.

The 500 series Analog Delay combines the sound of the ultimate analog delay with convenient digital control and flexibility to create the perfect recording and live sound tool.

View product on the Moog website.

Please note that these videos are dynamically generated by means of a Youtube search for the phrase "Moog Analog Delay" to save you time searching Youtube yourself. As such, the views expressed may not be those of Red Dog Music Limited, any product features or specifications quoted should be confirmed with Red Dog Music staff prior to ordering, and the content may not always be relevant to the product shown on this page.

  • £799.00

    Millennia Media's authentically transparent microphone and instrument preamp for the 500-series format.

    • Frequency response: < 10 Hz to > 200 kHz
    • Max gain: 60 dB (70 dB in Ribbon Mode)
    • THD: < .003%, Typical < .001%
    • Noise: -130 dB EIN
    • Impedance: 2210 ohms in, 24.3 Ohms (x2) out
    • Max output: 1 kHz @ 35dB of gain
    • THD: < 0.001% at +26dBu output
    • Designed for 500-series lunchbox and rack chassis
  • £599.00

    A great choice for your growing collection of modules, the Lindell 510 mkII gives you 10 slots of clean power for your processing

    • Chassis for 500 series modules
    • 10-slot capacity
    • Capable of 500mA per slot
    • Lightweight aluminium enclosure
    • Built-in overload protection
    • Gold-plated XLR connectors
    • On-board 48v phantom power
    • No-noise power supply
    • Removable rackears for desktop use
  • £549.00

    Turn your pristine audio into something straight from the arcade: put a Meris Ottobit in your lunchbox!

    • Sample rate reducer and bitcrusher 500 series module
    • Pitch Track Enabled Ring Modulator
    • Tap Tempo controlled Triggered Envelopes & LFO Modifiers
    • Selectable LFO and Ring Mod Waveshapes
    • Blendable Ring Mod AM/FM Modulation
    • Premium analogue signal path and 24-bit AD/DA w/32 bit floating point DSP
  • £536.00

    With the same circuit topology and components as the original design, the Focusrite Red 1 500-series preamp sounds just as impressive

    • 500-series Microphone Preamp Module
    • Same circuit topology and components as the original red
    • Custom Carnhill output transformer
    • Traditional wide bandwidth of the original Red series
    • The Red 1 500 is suitable for almost any microphone – ribbon, dynamic or condenser
  • £409.00

    With the the gain, transformers, eq and utility feature you need in your front end, the Lindell 6X500 is the perfect module for your lunchbox!

    • Preamp and EQ module for 500 series racks
    • Transformer-coupled balanced I/O
    • Up to 65dB gain
    • Passive EQ (inductor and OPA gain make-up)
    • Switched low/high frequency boosts
    • LF Boost: 30 / 60 / 100Hz (approx).
    • HF Boost: 6 / 10 / 16 kHz (approx).
    • Separate high boost bandwith switch
    • Reversible polarity
    • 48v switchable phantom power
  • £409.00

    A great choice for your 500 series rack, put the classic Pultec sound in your studio with the Lindell PEX-500VIN eq module

    • Pultec-style eq for 500 series racks
    • Designed for and compatible with all 500 series racks and lunchboxes
    • Built around the OPA1731 opamp
    • Transformer coupled balanced inputs
    • Transformer coupled balanced outputs
    • 3-step switched low/high frequency boost
    • 3-step switched HF attenuation
    • True bypass hardware for ease of A/B comparison
    • All-discrete design for optimum signal flow
Available to order (more info)
Usually delivered within 7 working days
  • Free shipping to most of the UK
  • Shipping to mainland UK destinations for all items over £99 is FREE. For all other items, shipping currently starts at £4.99 unless specified otherwise.

    If you require shipment to destinations outside the UK, please contact us for a quote.

  • 14-day money-back guarantee
  • For all items ordered online or over the phone, we offer the statutory 14 day “cooling off period”. This means that if you are unhappy with the goods for whatever reason, you can return them for a full refund within this period.

    Please note, however, that certain items are exempt from this – see our Terms and Conditions for more info.

  • 1 year warranty
  • This product comes with a 1 year warranty as standard.

    Please note that you will need to register your product with the manufacturer to qualify for any warranty beyond 12 months.

© 2017 Red Dog Music -
1 Grassmarket, Edinburgh EH1 2HY - 0131 229 8211
Company Reg. No. SC343597 - VAT No. GB933628805 - FRN 676575